*Purchase was purchasedwatchThe illustrations in the instruction manual may differ.
operating instructions
Product Features
This product uses solar cells from 2 o'clock to 10 o'clock on the dial to convert light energy into electrical energy.watchThis is an analog quartz solar power watch that drives the
How to set the time
1. Pull the crown out to time correction position 1.
2. Turn the crown to set the time.
*You can move 4-5 minutes ahead of the time you want to set and adjust by returning the minute hand to adjust the setting more accurately.
3. Return the crown to its normal position ⓪ according to the time signal etc.
*When shipped, the spacer is placed in a power saving mode with the crown pulled in. Remove the spacer before using.
Features unique to solar power watches
• About the Quick Start function
No charging at allwatchEven when the light is stopped,watchThis function allows the needle to start moving immediately. However, if you block the light at this time, the charging is not sufficient,watchwill stop again.
• About the charging warning function
The second hand moves for 2 seconds, indicating that there is no charge. At this time toowatchIt moves accurately, but after a while since I started using the 2-second hand,watchwill stop. Lightly charge it, then return it to the original 1 second hand.
• Overcharge prevention function
This function prevents further charging once the charging is complete.
About charging
It can be charged by shining direct sunlight or fluorescent light on the dial.
Also, no matter how much you charge it, there is no need to worry about overcharging. (With overcharge prevention function)
With clothes etcwatchIf the product is hidden or is not exposed to light, it will not be able to be fully charged if it is used or stored in an environment that is not easily exposed to light.
To ensure comfortable use, do the following:
• watchOnce you remove it, place it in a bright place to charge it.
• watchWhen storing in a place away from light for a long time, make sure to charge it thoroughly before storing.
※watchIf the product reaches a high temperature, it may cause deformation or discoloration of exterior parts such as the dial and solar cells, and malfunction of mechanical parts.
• watchDo not charge in a place where the temperature is above 60°C.
• When charging with a light source that is prone to high temperatures, such as incandescent lamps or halogen lamps, be sure to keep at least 50cm away.
• Do not charge in places that are prone to high temperatures, such as car dashboards.
Charging time estimate
Waterproofing performance
※waterproofwatchBe sure to check the waterproof performance and functions of the product before using it correctly. armwatchThe dial or back cover is marked.
• Reinforced waterproofing for everyday lifewatch(Waterproof for 5 Atm) can be used for swimming, etc., but cannot be used for free diving (skin diving) or scuba diving.
• Reinforced waterproofing for everyday lifewatch(10/20 Atmospheric Waterproof) can be used for free diving, but not for scuba diving/saturated diving using helium gas.
About secondary batteries
This product has a built-in secondary battery that stores electrical energy. This secondary battery is a clean energy battery that does not contain harmful substances such as mercury.
• Replacing secondary batteries
The secondary batteries used in this product can be recharged repeatedly, so there is no need to change the battery regularly like conventional primary batteries. However, if used for a long period of time, current consumption will be increased due to dirt on the gears and oil run out, resulting in faster secondary batteries being consumed.
watchCare and storage of
The cases and bands come into contact with the skin directly, just like underwear. Always use cleanly as unnoticeable dirt such as sweat, dirt, or dust may stain the cuffs of clothes.
• Care
Case/windshield: If sweat or dirt gets on your skin, wipe it off with a soft cloth. Alternatively, use a brush or something similar to remove dirt with a neutral detergent.
Band: If sweat or dirt gets on the product, the color may fade, so wipe it off with a dry cloth.
crown: If you leave it unmoved for a long time, the attached dirt and dirt may harden and become unoperated, so please allow the crown to spin without any problems from time to time. Also, remove any dirt and dirt.
• Storage
watchIf you are not using the product for a long period of time, wipe off sweat, dirt, moisture, etc. thoroughly and store in a place away from high, low, or high humidity.
Magnetic resistance
This product is affected by magnetism that is nearby, and the time may shift or stop. The built-in motor uses magnets and is affected by strong magnetic forces from outside. Use at least 10cm away from magnetic products.
Product Specifications
Model: Analog Quartz Solar Power Watch
Display function...hours, minutes, seconds
Crystal frequency...32,768 Hz (Hz: frequency per second)
Time accuracy: Average monthly difference of ±20 seconds (temperature 5℃ to 35℃ when portable)
Operating temperature range: -10℃ to +60℃
Drive system: Step motor type
Power source used: Button type lithium secondary battery: 1 pc
Duration: Approximately 3.5 months (from completion of charging until operation stops)
Warning time: Approximately 2 days (training hands for 2 seconds or 1 second before stopping operation)
Additional functions... Quick start function, charging warning function, overcharge prevention function