How to change bands

１．watchSecure the main unit and insert the tool into the hole on the side.

２．Push down and move the band forward or sideways.

３．The tip of the spring will come off the spring hole and the band can be removed.

１．Insert the spring rod into the band to be attached, and make sure the tips of the spring rod pop out from both sides.

２．Insert the tip of the spring rod into one hole.

３．Use a tool to insert the opposite tip of the spring rod into the hole.

4. Make sure the tip of the spring rod is firmly in the hole. You can check by gently pulling the attached band.

- When replacing the band of this product, take great care to prevent injuries and accidents. (Please be careful as we cannot take any responsibility for any injury or other damage if you are injured.)
・If you are unable to exchange the product yourself, please contact the nearest person.watchPlease consult the store etc. (It may be charged or not available) Especially if the spring rod is hard and difficult to avoid due to rust or dirt sticking,watchPlease be careful as there is a risk of scratches on the main unit.
-Pieces, pins, tools, etc. after the band has been adjusted may cause accidental ingestion or injury, so please store them in a safe place out of reach of infants.
・Please note that scratches and loss of parts due to the customer's own replacement work are not covered by the warranty.